Technical

mariz worktops are ‘Compact High Pressure Laminates’ which meet the requirements of EN438. They are guaranteed for ten years against manufacturing defects provided they are fitted in accordance with the installation instructions and are used for their intended purpose.

mariz worktops have a surface that makes cleaning simple. Usually a moist cloth is sufficient, but use washing-up liquid to get rid of any grease. Avoid using harsh cleaning equipment and abrasive cleaners as they may damage the surface. Stubborn dirt or can be removed using mild solvents or proprietary glass cleaners. 

For more detailed advice, there is a care & maintenance booklet in each worktop. 

mariz worktops can be cut and installed using conventional woodworking tools – always ensuring that cutters and blades are sharp. This will ensure clean edges for jointing or finishing. You can join mariz surfaces using either a butt joint or mason’s mitre using biscuit joints and adhesive.

We have a selection of ColorJoint adhesives to complement the mariz range of décors. These are available along with the mariz installation kit.

mariz surfaces are compatible with most hobs although the 12.5mm thickness means that some adjustments may be necessary to ensure there is sufficient space between the hob and items beneath. For a single oven the cabinet shelf will usually be moved lower to give correct space for air circulation above. 

Refer to appliance manufacturers instructions to ensure that correct clearances are achieved.